Full Tank Swing Automatic Gate Operator
The Full Tank is one of the biggest automatic gate opener in our range. It is a hydraulic operator designed for high duty cycle commercial, industrial and residential electric driveway gates up to seven metres wide.
240 VOLT HYDRAULIC GATE OPERATOR - COMMERCIAL / INDUSTRIAL - 7.0 METRE LEAF
Manufactured by SEA in Italy the Full Tank is a 240 volt swing gate hydraulic operator. The use of hydraulics in swing gate motors has been around for many years with the motor, tank and pump all contained within the housing. As with all things hydraulic gate operators come in various levels of quality but given that hydraulics are essentially designed for demanding sites our attitude is that they need to be the best and no corners should be cut. To this end SEA is recognised as being in the top two manufacturers in the world of hydraulic gate motors and maintains high levels of quality by producing all vital components in house. Low side room is a feature of this operator needing as little as 100mm. The FULLTANK is a reversible operator with key operated manual override. The FULLTANK is suitable for gates to 7 metres wide and likes nothing better than a high duty cycle.

It is possible to use a variety of control boards to control the FULLTANK including the ATA CB6, DG240 and the D760. The suggested board is the LOGICSEADG240 which has thrust control to regulate the FULLTANK force and can be used as a one or two motor controller.
PRICING
This product has free delivery when ordered online.
FULLTANK -
Single operator for gates to 7.0 metres wide
$1807.00
BUY ONLINE
LOGICSEADG240 -
Logic control for one or two FULLTANK motors
$545.00
BUY ONLINE
RECSEAPLUG -
Plug In wireless receiver
$100.00
BUY ONLINE
REMSEA -
4 channel 433mhz key ring style remote control.
$57.00
BUY ONLINE
SEAKEYPAD -
SEA wireless outdoor keypad
$248.00
BUY ONLINE
OUTSWING -
Zinc dipped 8mm solid steel outswing bracket
$71.00
BUY ONLINE
SPECIFICATION
Motor Voltage -
240 volts AC
Current Standby -
0mA
Current at use -
2.0A
Motor power -
220W
Maximum thrust -
640Nm
Opening Time 90 degrees -
20 seconds
Maximum gate width -
7000 mm
Duty cycle -
70 operations per hour
Height -
90mm
Width -
90mm
Length -
1270mm
Weight -
12.0 Kg
IP rating -
IP55
DOWNLOAD & MANUALS
MOTOR MANUAL -
Click here to download the installation manual.
LOGIC CONTROL MANUAL -
Click here to download the logic control manual.
BROCHURE -
Click here for a brochure.
OPTIONS
PHOTOCELLS - A must have if you use automatic closing function is photocells. Photocells provide an extra level of safety to prevent gates from closing on vehicles or pedestrians. Sliding gates can have a single set between the gate posts or multiple sets if desired at various heights. More information and a full list of product here.

ELECTRIC GATE LOCK - There is varied debate about when an automatic gate should have the extra security of an electric gate lock. The lock increases security and also protects your gate operating system. It operates automatically when you choose to open your gate. Check them out here.