ZIPPOXL AUTOMATIC SWING GATE OPERATOR
The ZIPPOXL is an articulated arm operator and is suitable for gates to 4.0 metres wide.
12 VOLT ELECTRIC SWING GATE OPERATOR - 4.0 METRE LEAF
Manufactured in Italy by TAU the ZIPPOXL is a harmonic style 12 volt swing gate electro mechanical operator suitable for gates to 4.0 metres wide.. It is a non reversible operator with manual override key and limit switches. One of the benefits of the 12 volt motor is the ability to use battery backup meaning you may never have to use the manual override. The use of tempered steel is prominent in this construction and the strong galvanised steel arms also add strength.
The ZIPPOXL is best married to the TAU control board D749MA. The D749MA has a full host of functions to give total control over performance and slow down functions.
Single operator for gates to 4.0 metres wide
Logic control for one or two motors with receiver.
2 channel 433mhz key ring style remote control.
TAU wireless outdoor keypad
Battery leads for TAU control board. (Requires 9ah battery)
10W panel, 26ah battery galv enclosure and full mounting post
25W panel, 26ah battery, regulator glav enclosure and full mounting post
Motor Voltage -
12 volts DC
Current Standby -
Current at use -
Maximum thrust -
Opening Time 90 degrees -
Maximum gate width -
Duty cycle -
IP rating -
DOWNLOAD & MANUALS
MOTOR MANUAL -
LOGIC CONTROL MANUAL -
PHOTOCELLS - A must have if you use automatic closing function is photocells. Photocells provide an extra level of safety to prevent gates from closing on vehicles or pedestrians. Sliding gates can have a single set between the gate posts or multiple sets if desired at various heights. More information and a full list of product here
ELECTRIC GATE LOCK - There is varied debate about when an automatic gate should have the extra security of an electric gate lock. The lock increases security and also protects your gate operating system. It operates automatically when you choose to open your gate. Check them out here