ON THIS PAGE
The SEA remote control is a unique code 433 mhz, four channel
remote suitable for SEA wireless receivers. Key ring style size.
The REMGER remote control is a unique code 433 mhz, four channel
remote suitable for ID logic control boards, ASA receivers and the most ASA logic control range. Key ring style size.
The BENINCA remote control is a 433 mhz, four channel remote
suitable for BENINCA receivers.
Sherlo 4 channel long range transmitter. Combine this transmitter
with the Sherlo receiver and you have some serious long range
remote controls. Up to 500mtr range
Outdoor wireless push button for use with the long range Sherlo
The GSM Remote is a is a unique receiver because you activate your
gate on your chosen phone. Simply program the unit with up to 100
telephone numbers and when one of the programmed numbers calls
(from anywhere in the world on a mobile) the receiver recognises the
number and opens the gate without even answering the call (no
call costs).You don't even need extra remote or keypads for family,
friends or the lawn mowing man. Simply program their mobile number
into your unit and access is allowed. They simply dial your gates
unique number, the gate recognizes their number and opens the gate.
This unit has endless security and convenience uses.
12vDC - Quad Band - Two 240 volt relays
Click here for the GSMREMOTE manual.
The Gatebox unit is a small and convenient
module for controlling your gate from anywhere in the world. Used in conjunction with GATESWITCH
or if your control board has limit switches feedback is also possible to determine via the app if the gate is open or closed. To operate the module needs to be installed within an area and strong wifi signal.
12-24 AC-DC - Two inputs and two outputs.
Click here for the gatebox manual.
The P6 is a wireless keypad that is powered by battery and is
suitable for all ASA receivers on board and the RSK4 stand alone
Wireless digital key pad to be used together with Beninca receivers - batteries included.
Vandal-proof digital keypad with aluminium casing, polished glass- effect front panel and chrome- plated buttons with LED back- lighting.
Acoustic feedback when the buttons are pressed and the code entered. The red or green central LED and the buzzer, with a repeated
or long tone, indicate whether the code has been entered correctly or not.
An access password can be set to protect the system from unauthorised persons changing the settings. The keypad is quick and easy to install.
The wireless version handles three types of code: ARC, rolling code and programmable code. This last type guarantees total security because
of the high number of possible combinations (around 340 billion billion billion billion). To understand this level of security, think about
a computer with a transmitter trying to send 1 billion combinations a second to find the device code, which would take 10,790 billion
billion years to try them all.
Comes with 3V, CR123A (1400 mAh) lithium battery ensuring a long life. 254 storable codes, which can be managed hierarchically by associating a certain number of child codes
to each parent code. The hierarchical management makes it very flexible to configure; access codes can be personalised for different users or
else specific codes can be deactivated. In both cases, there is no need to intervene in the receiver memory. Outdoor range 100m.
The Sherlo Wireless Keypad is designed for Secure access control of buildings, properties, gate/garage entrances, internal doors, striker locks and even arming/disarming alarm panels. The unit can be programmed with up to 9 RF Channels to control different receivers. You can very easily program the keypad on a PC in Notepad so that you don't have to waste time manually programming the keypad. This can then be very easily & reliably saved onto the Keypad using a microSD card. The keypad is battery powered, but has a 12V DC wired input connector.
Wireless Code hopping
1000 unique Pin code from 1-10 digit
Backing up the unit with a microSD card
Wrong code lock out function
9 Channel RF outputs
1 Door bell RF output
Receiver - SHERLORX4500
The TAU wireless keypad is a very smart and robust unit suitable
for outdoor installations. The keypad is capable of four different
channels allowing multiple users. The TAU wireless keypad can be married to either the TAU plug in receiver as used in TAU boom gates or any of the TAU built in receivers in motors like the TONE range. Of course you can always use the TAU stand alone receiver and use on any system you desire.
Receiver - TAU built in
Receiver - RECTAUPLUG
Wireless keypad with 12 backlit buttons (only when used)
Rolling code PLUS (Billions of combinations possible)
433 MHz frequency
Two-channels (two different codes)
IP54 Protection class
Compatible with UNI rolling code receivers
2x3V lithium batteries
OTHER PAGES OF INTEREST